مقاله Life Assessment of a gas turbine rotor using a unified continuum damage mechanics model در word دارای 6 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد مقاله Life Assessment of a gas turbine rotor using a unified continuum damage mechanics model در word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Life Assessment of a gas turbine rotor using a unified continuum damage mechanics model در word،به هیچ وجه بهم ریختگی وجود ندارد
بخشی از متن مقاله Life Assessment of a gas turbine rotor using a unified continuum damage mechanics model در word :
سال انتشار: 1390
محل انتشار: اولین کنفرانس تمدید و تخمین عمر سازه های هوایی و صنعتی پیر و فرسوده
تعداد صفحات: 6
چکیده:
In this research, the unified creep continuum damage mechanics (CDM) model of Lemaitre was used to model the stress – strain behavior of a gas turbine rotor. The unified damage law can be applied for the creep and low cycle fatigue damage. It is based on the increment of the accumulated inelastic strain which can be due of creep damage or the low cycle fatigue damage. The parameters of the unified CDM model, including Q and Norton constants, and constants of the nonlinear kinematic hardening model were optimized and determined by cyclic tension and relaxation tests. Creep damage was modeled and stress – strain evolution in the gas turbine rotor was obtained. A careful three dimensional thermal analysis was carried out and the temperature gradient, which was used to determine stresses of the gas turbine rotor, was obtained. The Replica tests were done on the four points of the rotor surface and the formation of the creep voids was verified under a SEM. Based on the CDM analysis, the creep-fatigue interaction was considered and the remained life of the rotor was estimated.
دانلود این فایل
- ۹۶/۰۱/۰۷